Permeation of CO2 and N2 through glassy poly(dimethyl phenylene) oxide under steady- and presteady-state conditions

Glassy polymers are often used for gas separations because of their high selectivity. Although the dual-mode permeation model correctly fits their sorption and permeation isotherms, its physical interpretation is disputed, and it does not describe permeation far from steady state, a condition expected when separations involve intermittent renewable energy sources. To develop a more comprehensive permeation model, we combine experiment, molecular dynamics, and multiscale reaction–diffusion modeling to characterize the time-dependent permeation of N2 and CO2 through a glassy poly(dimethyl phenylene oxide) membrane, a model system. Simulations of experimental time-dependent permeation data for both gases in the presteady-state and steady-state regimes show that both single- and dual-mode reaction–diffusion models reproduce the experimental observations, and that sorbed gas concentrations lag the external pressure rise. The results point to environment-sensitive diffusion coefficients as a vital characteristic of transport in glassy polymers

The valence-bond charge-transfer-exciton model for predicting nonlinear optical properties (hyperpolarizabililies and saturation length) of polymeric materials

A simple theory is developed and applied to the polarizability (α), second hyperpolarizability (γ), and the saturation lengths for nine polymeric materials. The theory is based on a valence bond view of the ground and excited states and considers the excited states as charge transfer excitons. It involves just two parameters which can be extracted from simple molecular orbital calculations and/or from experimental values of band gap and bandwidth. For the one system (oligothiophenes) with experimental data on saturation length, the predicted behavior of α and γ with polymer length is in good agreement with experiment. © 1994 American Institute of Physics.published_or_final_versio

Valence-bond charge-transfer solvation model for nonlinear optical properties of organic molecules in polar solvents

A simple model is developed for predicting solvation effects on the nonlinear optical properties of charge transfer organic materials such as 1,1 dicyano,6-(di-butyl amine) hexatriene. This model is based on the valence-bond charge-transfer (VB-CT) framework, using a continuum description of the solvent. The resulting VB-CT solvation model leads to analytic formulas for the absorption frequency (Eg), the polarizability (α), the hyperpolarizabilities (β,γ,δ), and the bond length alternation with only one solvent dependent parameter (ε, the dielectric constant of the solution). The theory involves just four solvent-independent parameters, V0, t, SF, and Q which are related to the band gap, bandwidth, geometry, and dipole moment of the CT molecule [plus a length (R DA) and force constant (k) derivable from standard force fields]. The results are in good agreement with experiment. © 1994 American Institute of Physics.published_or_final_versio

The valence-bond charge-transfer-exciton model for predicting nonlinear optical properties (hyperpolarizabililies and saturation length) of polymeric materials

A simple theory is developed and applied to the polarizability (α), second hyperpolarizability (γ), and the saturation lengths for nine polymeric materials. The theory is based on a valence bond view of the ground and excited states and considers the excited states as charge transfer excitons. It involves just two parameters which can be extracted from simple molecular orbital calculations and/or from experimental values of band gap and bandwidth. For the one system (oligothiophenes) with experimental data on saturation length, the predicted behavior of α and γ with polymer length is in good agreement with experiment. © 1994 American Institute of Physics.published_or_final_versio

Search for pair-produced long-lived neutral particles decaying to jets in the ATLAS hadronic calorimeter in ppcollisions at √s=8TeV

The ATLAS detector at the Large Hadron Collider at CERN is used to search for the decay of a scalar boson to a pair of long-lived particles, neutral under the Standard Model gauge group, in 20.3fb−1of data collected in proton–proton collisions at √s=8TeV. This search is sensitive to long-lived particles that decay to Standard Model particles producing jets at the outer edge of the ATLAS electromagnetic calorimeter or inside the hadronic calorimeter. No significant excess of events is observed. Limits are reported on the product of the scalar boson production cross section times branching ratio into long-lived neutral particles as a function of the proper lifetime of the particles. Limits are reported for boson masses from 100 GeVto 900 GeV, and a long-lived neutral particle mass from 10 GeVto 150 GeV

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Effects of tryptophan depletion and tryptophan loading on the affective response to high-dose CO2 challenge in healthy volunteers

It has been reported that in panic disorder (PD), tryptophan depletion enhances the vulnerability to experimentally induced panic, while the administration of serotonin precursors blunts the response to challenges. Using a high-dose carbon dioxide (CO2) challenge, we aimed to investigate the effects of acute tryptophan depletion (ATD) and acute tryptophan loading (ATL) on CO2-induced panic response in healthy volunteers. Eighteen healthy volunteers participated in a randomized, double-blind placebo-controlled study. Each subject received ATD, ATL, and a balanced condition (BAL) in separate days, and a double-breath 35% CO2 inhalation 4.5 h after treatment. Tryptophan (Trp) manipulations were obtained adding 0 g (ATD), 1.21 g (BAL), and 5.15 g (ATL) of l-tryptophan to a protein mixture lacking Trp. Assessments consisted of a visual analogue scale for affect (VAAS) and panic symptom list. A separate analysis on a sample of 55 subjects with a separate-group design has also been performed to study the relationship between plasma amino acid levels and subjective response to CO2. CO2-induced subjective distress and breathlessness were significantly lower after ATD compared to BAL and ATL (p <0.05). In the separate-group analysis, Delta VAAS scores were positively correlated to the ratio Trp:I LNAA pound after treatment (r = 0.39; p <0.05). The present results are in line with preclinical data indicating a role for the serotonergic system in promoting the aversive respiratory sensations to hypercapnic stimuli (Richerson, Nat Rev Neurosci 5(6):449-461, 2004). The differences observed in our study, compared to previous findings in PD patients, might depend on an altered serotonergic modulatory function in patients compared to healthy subjects

A low mortality, high morbidity Reduced Intensity Status Epilepticus (RISE) model of epilepsy and epileptogenesis in the rat

Animal models of acquired epilepsies aim to provide researchers with tools for use in understanding the processes underlying the acquisition, development and establishment of the disorder. Typically, following a systemic or local insult, vulnerable brain regions undergo a process leading to the development, over time, of spontaneous recurrent seizures. Many such models make use of a period of intense seizure activity or status epilepticus, and this may be associated with high mortality and/or global damage to large areas of the brain. These undesirable elements have driven improvements in the design of chronic epilepsy models, for example the lithium-pilocarpine epileptogenesis model. Here, we present an optimised model of chronic epilepsy that reduces mortality to 1% whilst retaining features of high epileptogenicity and development of spontaneous seizures. Using local field potential recordings from hippocampus in vitro as a probe, we show that the model does not result in significant loss of neuronal network function in area CA3 and, instead, subtle alterations in network dynamics appear during a process of epileptogenesis, which eventually leads to a chronic seizure state. The model’s features of very low mortality and high morbidity in the absence of global neuronal damage offer the chance to explore the processes underlying epileptogenesis in detail, in a population of animals not defined by their resistance to seizures, whilst acknowledging and being driven by the 3Rs (Replacement, Refinement and Reduction of animal use in scientific procedures) principles

Molecular modelling of the GIR1 branching ribozyme gives new insight into evolution of structurally related ribozymes

Twin-ribozyme introns contain a branching ribozyme (GIR1) followed by a homing endonuclease (HE) encoding sequence embedded in a peripheral domain of a group I splicing ribozyme (GIR2). GIR1 catalyses the formation of a lariat with 3 nt in the loop, which caps the HE mRNA. GIR1 is structurally related to group I ribozymes raising the question about how two closely related ribozymes can carry out very different reactions. Modelling of GIR1 based on new biochemical and mutational data shows an extended substrate domain containing a GoU pair distinct from the nucleophilic residue that dock onto a catalytic core showing a different topology from that of group I ribozymes. The differences include a core J8/7 region that has been reduced and is complemented by residues from the pre-lariat fold. These findings provide the basis for an evolutionary mechanism that accounts for the change from group I splicing ribozyme to the branching GIR1 architecture. Such an evolutionary mechanism can be applied to other large RNAs such as the ribonuclease P